How to Clean A Cast Iron Skillet And Care for It (Or How I Learned To Love Cast Iron)
Have you ever wondered how to clean a cast iron skillet? Or maybe you’ve been curious about how this versatile kitchen tool can replace your nonstick pans. In this guide on cast iron care and cleaning I share my journey and #1 tip from stuck-on food to throwing away my non-stick pans – and how to keep cast iron well-seasoned, too. If you’ve had a love-hate relationship with your cast iron, join me in saying goodbye to rust and stickiness and hello to delicious, evenly cooked dishes!
✩ What readers are saying…
“THAAAAAAAANK YOU!!!! I am one of those who heard how great they were, bought them, got frustrated and put them in the back of the pantry. This post gives me new hope!! Again…. THANK YOU!!!!!!” -Mackenzie

I cannot tell you how excited I am to write about my success with using a cast iron skillet because for many years I was not successful. How many? Twenty years – and I wish I were joking.
I acquired a cast iron pan shortly after I was married- I think it came from Brian’s grandma, or maybe a thrift store, but it had definitely been used. I didn’t grow up using cast iron, but I had heard people tell me all the reasons they loved their pans: they were naturally non-stick, last more than a lifetime, heat evenly, and so on. So I was was looking forward to trying it in my new household.
And try I did. But everything stuck- eggs, meat, you name it. Then I’d shove it to the back of the cupboard, eventually bring it out to try again with the same results, until it got permanently relegated to our little vintage trailer. Perfect for vintage cast iron, right? Plus, that meant there were only a few days each summer that I had to use it- and invariably curse it.
(I know now that when we scrubbed the dickens out of it to get all the stuck things off we were just perpetrating the cycle – hindsight is 20/20, right?)
However, after a number of years of marriage when my third set of non-stick skillets started peeling, I realized I didn’t want to keep buying new pans every few years so I needed to figure this cast iron pan thing out.
How to Clean a Rusty Cast Iron Skillet
By this time my sad, neglected skillet was rusty, but thanks to the internet (not around during my first attempts), I found out how to clean the rust and re-season the pan fairly easily. I basically followed steps similar to this technique:
- Gently scrub off any rust with a steel wool pad (plain, not the kind with cleaners in it).
- Wash and thoroughly dry the skillet – I set it on the stove for a few minutes on medium heat.
- Coat the inside and outside of the pan with your choice of oil/grease (see below!).
- Place the pan upside down in a 350 degree oven for one hour and then let cool in the oven.
- Repeat as needed (I did two rounds of oiling and heating on my rusty pan).
My #1 Tip To Finally Loving Cast Iron
There was one major thing I did differently, though, when it came to coating the pan from what I read online and had done in my previous attempts. I did a lot of research and what I read over and over again was to use this to season the pan:

Not canola or a vegetable oil as I had always used, but bacon grease!
You can also use lard or coconut oil (but NOT olive oil as some sites state, since olive oil has a low smoke point and shouldn’t be used in applications like this). I prefer bacon grease for a simple reason – it’s free after cooking bacon, unlike coconut oil, and lard isn’t easy to come by.
(Oh, and side note that has to be mentioned: the fact that I am using something we regularly used to throw away? You know I love that!)
Why is what you coat cast iron with so important?
The short answer? Industrial oils.
You know that sticky coating that you can feel on old pans, cookie sheets, muffins pans, and other baking pans? This comes from using the industrial vegetable oils (corn, vegetable, canola) that have only been consumed regularly since the 1950’s (and we know cast iron has been around a lot longer than that).
They are called industrial oils because they cannot be made without a factory and machines – think about how you would get oil out of corn in your kitchen. It can’t be done, unlike rendering lard, collecting bacon grease, or even cooking coconut meat to extract the oil.
Thinking about how unnatural these oils are led our family to give up all industrial oils as a part of eating real, healthy foods.
The other thing I discovered was that awful “old oil” smell I had notice was also a direct result of using industrial oils. I have found that I don’t get that smell at all when I use a bit of bacon grease to season our pans.

But won’t food cooked in the pan have a bacon flavor? Does it smell like bacon when heating the pan?
I wondered this too! While it did smell like bacon a bit during the re-seasoning process, I’ve learned it doesn’t smell much like bacon in normal usage and has never made our food taste like bacon.
I think it’s because you use very little grease on the pan to maintain the seasoning – less than 1/8 of a teaspoon. It may also be because it’s best to use only the clear part of the grease (which is, in fact, like rendered lard). Whatever the reason, there’s no noticeable smell or flavor.
The ultimate test for me? Scrambled Eggs.
For the first few months after re-seasoning, I cooked only things that were greasy like bacon, or things that don’t stick like sautéed mushrooms in order to build up more of the seasoning to be more “non stick.”
The ultimate test in my book was scrambled eggs – it’s where I had the most trouble before. Finally the weekend came to make scrambled eggs with cheese.
And all I can say is I’m glad there wasn’t a video camera around as I was jumping up and down in front of the stove saying “they’re not sticking!” over and over again. As if I was the first one to discover this, ha!
There were still bits of egg and cheese stuck to the pan in places (see an example below), but it wasn’t much and there wasn’t that full layer of stuck on egg I used to get. (Update: after years of proper use and seasoning, I don’t even have this much egg/cheese stick to the pan anymore – it really is almost non-stick!)
Of course I couldn’t keep this to myself. If you’re like me and have had trouble with cast iron – or think it’s too much work – I want to show you how simple it can be to clean and care for cast iron – and encourage you that it really can become your favorite pans with just a bit of your time and attention!
How to Clean A Cast Iron Skillet: Step-by-Step

Step 1: Remove any cooked on residue. TIP: After serving food, run a bit of water in the pan to sit on the stove until you’re ready to clean it.

Use a plastic scrubber, walnut scrubber, or other non-metallic option (metal can remove the seasoning).
TIP: Some people regularly use coarse salt, but that would be wasting something in my frugal world, ha! However, if you have really stuck-on food, it is a good option- I’ve used it successfully for the residue left after browning meat.

Step 2: Wash the pan with hot water only and no soap. Yes, it’s OK, it is getting clean, I promise (though you can occasionally use a bit of soap if you need). I do use the scrubber side of my sponge (though now I only use a walnut scrubber sponge) and haven’t found that it takes the seasoning off, like some sites warn against. Your call.

Step 3: Dry the pan thoroughly on the stove. Heat it for just a minute or so on medium-high heat – not high and don’t walk away! (Yes, this has happened to my daughter and the pan got almost red with heat, but luckily didn’t ruin it – whew.)

Step 4: Season. Remove the pan from the burner and turn it off. Using a cotton rag (or paper towel, though they can leave paper residue) grab a smear of bacon grease and rub it all over the inside of the warm pan. Occasionally add it to the outside of the pan, whenever it seems to be looking ‘dry’ and like it needs it.

Step 5: Let cool. Set the seasoned pan back on the still warm burner and let the pan cool there before putting away. This helps seal in the seasoning.
That’s it! Yes, it takes a few minutes more than a regular skillet to dry, add the grease, and then let cool, but it’s small potatoes in the big scheme of things, right? Especially it means you won’t have to be replacing skillets in the future!
Here’s a common question I’ve been asked often since first publishing this:
“I just starting using a cast iron skillet and every time I clean it and re-season it with oil, the paper towel is gray and ashy looking. I can’t get it to come clean. Is that normal?”
That is normal – it’s not dirty, that’s the iron (and what causes the food cooked in it to be a good source of iron in our diet!) and also some of the seasoning – you don’t want to rub it all off as that’s what gives the ‘non-stick’ surface.

Tips to Maintain Cast Iron
- Do these same cleaning steps every time you use your skillet and you will keep a nice gleam on the pan that tells you it’s seasoned enough to meet all your non-stick needs.
- It’s also a good idea to regularly cook things in it with more fat, like bacon, browning ground beef, or cooking vegetable fritters or zucchini feta fritters in avocado oil.
- If it seems like the seasoning is wearing off, simply go through the steps to re-season the pan again.
- Remember that acid foods like tomatoes and lemons can remove some of the seasoning, so long cooking of these things (like sauces) should be reserved for a stainless steel pan.
While the steps to clean and care for cast iron may have a few more than non-stick coated pans, it’s well worth it and becomes second nature after awhile. And then you may be like me in saying goodbye to non-stick pans forever!
Reader Raves
“You are far from alone! I have two cast iron pans that are currently sitting in my pantry shelf. I have baked/caked on who knows what and rusted yuk on mine. This has given me the gumption to drag them out clean them up and season them! Thanks for the quick tips and I also never gave the bacon grease thing a thought! Makes a ton of sense! Wish me luck! Thanks again for the great info!” -Sue
“I am totally with you. I started off many years ago, trying to season and use a cast iron pan, but with no luck. I gave up and switched to non stick, but now, after reading your blog, i’m going to give it a try again.” -Erika
“Ha! My husband wanted to season our cast iron skillet with bacon grease much to my dismay. ‘Won’t that make it sticky? Surely we can use something else?’ He insisted and now it’s amazing! Clean up is a breeze and nothing sticks!” -Kylie
Have you ever had issues with cast iron (tell me I’m not alone!)? Do you use it or want to use it? Leave a comment and let me know!
Want to save this?
Enter your email below and you’ll get it straight to your inbox. Plus you’ll get easy new recipes, gardening tips & more every week!
How to Clean and Maintain Cast Iron
Materials
- Any type of cast iron skillet, pot, or pan
- 1 rubber scraper or any other non-metallic scraper
- sponge or dish cloth
- 1/8 teaspoon bacon grease or lard, or coconut oil
- small cotton rag or paper towel
Instructions
- Step 1: Remove any cooked on residue. Use a plastic scrubber, walnut scrubber, or other non-metallic option (metal can remove the seasoning). TIP: After serving food, run a bit of water in the pan to sit on the stove until you're ready to clean it.
- TIP: Use coarse salt, rubbed all over with a sponge or dish cloth if you have really stuck-on food, like after browning meat.
- Step 2: Wash the pan with hot water only and no soap, preferably. You can use a bit of soap every now and then, but detergent is harsh and may remove the seasoning.
- Step 3: Dry the pan thoroughly on the stove. Heat it for just a minute or so on medium-high heat – not high and don't walk away! TIP: set a timer.
- Step 4: Season: Remove the pan from the burner and turn it off. Using a rag (or paper towel) grab a smear of bacon grease and rub it all over the inside of the warm pan. Occasionally add it to the outside of the pan, whenever it seems to be looking 'dry' and like it needs it.
- Step 5: Let cool: Set the seasoned pan back on the still warm burner and let the pan cool there before putting away.
To Maintain Cast Iron
- Do these same cleaning steps every time you use your skillet and you will keep a nice gleam on the pan that tells you it's seasoned enough to meet all your non-stick needs.
- Regularly cook things in it with more fat and avoid long simmering acid foods like tomatoes and lemons.
- If it seems like the seasoning is wearing off, simply go through the steps to re-season the pan again.
To Re-Season (and remove rust, if needed):
- Gently scrub off any rust with a steel wool pad (plain, not the kind with cleaners in it).
- Wash and thoroughly dry the skillet – I set it on the stove for a few minutes on medium heat.
- Coat the inside and outside of the pan with bacon grease, coconut oil, or lard.
- Place the pan upside down in a 350 degree oven for one hour and then let cool in the oven.
- Repeat as needed.
More Reader Tips
Note: This article was originally published in March of 2011 and became one of my first viral posts. For me, it was simply a matter of sharing my excitement over finally figuring out how to use my cast iron pans so I could throw out the non-stick pans for good. I just had to overlook the fact that thousands of people were seeing my dirty egg pan, lol!
Here are just a few other tips readers have shared in the 100+ comments:
- To renew an old, rusted cast iron pan:
Option 1. “Just spray the piece all over, inside, outside and handle with oven cleaner. I usually do this outside. Close it up in a trash bag, place it outside in the sun, let it sit for 24 hrs. Rinse with the hose. Repeat if necessary. Bring it inside, wash with hot water, rinse with straight white vinegar, (to neutralize the oven cleaner) rinse with hot water, season. Voila. Like new. Every single time.”
Option 2. “You can also just leave it in a self cleaning oven. That will turn everything to ash! Then, re-season.” - Using only oil to clean:
“Once pan is seasoned, you do not have to use water to clean it in many instances. I use olive oil for my cooking, don’t let it burn. After cooking scrambled eggs, put a bit of olive oil (Jami here: please don’t use olive oil – it has a low smoke point!) in pan to wet the surfaces, use little spatula or paper towel – I use spatula to rub paper towel around not my fingers. After that, if anything still sticks, I may put a bit of hot water, but never leave it soaking with water.” - Not using oil each time:
“I don’t find that I need to oil my pan every time though, maybe because I use plenty of butter to cook my eggs, and it’s so well seasoned the surface shines. I have a small ancient cast iron pan and nothing sticks to it.” - Tip for more non-stick:
“…one thing you should ALL be doing is PREHEAT THOSE PANS!!!! This gets the old seasoning in shape for new oil to be added and fill in all those micro grooves that are what makes food stick! There are few things–other than maybe warming a tortilla or such–that don’t need SOME oil to cook (even in a non-stick!!!) and cast iron has more little grooves and spots than other material by it’s nature. Don’t put it on HIGH and wander off; just use a low or medium flame to get to temp and THEN add your oil.”



Anonymous- Oh, coffee grounds is a much better idea than salt in my book for scouring- using something you’re going to throw away anyway. 🙂
LadyKate- I’ve never thought to use it on the BBQ! I’ve heard that some old cast pieces are valued in the hundreds of dollars, so I bet your collection is worth something (other than cooking, that is!). How fun.
I had problems with a film of really sticky icky gunk….yeah I used veggie oil to fry something up. I put water in the pan and boiled it till it came off. Then I re-seasoned the pan and it was fine.
You can also season your cast in a BBQ or smoker. That’s how the kids dad does it. We have Several pots and pans that are used on a regular basis.
I have acquired some from estate sales, yard sales and been given them from family members.
Ebay is an excellent place to get some of the older pieces.I found an old two burner griddle used for warming tortillas on ebay for next to nothing.
I am a bit of a cast fanatic and have been collecting for quite a few years. I have a pan for poaching eggs, an old cast fish scalier, dutch ovens, fry pans, corn bread molds…etc
Once you get use to cooking in or on cast, it becomes habit to season them. Not to mention, you get your daily dose of iron from cooking in them. 🙂
I love all of my cast iron pots and pans! One trick I found for cleaning them is to use coffee grounds. The grounds provide all the scrubbing I need but still have the residual oils that are kind to my pots, it’s a little messy though.
Anonymous- Yahoo! Glad to have inspired you to get those great pans out of the cupboard. 🙂 I’d love to have one of those grill pans one day…hey, maybe I shouldn’t have said anything and let all these pans hit the thrift stores so I’d have a chance to find them… 🙂
Fabulous Info!You all just inspired me to tackle my three 🙂 thrift store cast-iron pans – A large as well as a quite small round pan – both Lodge brand AND a square cast-iron grill pan with the raised/ rippled surface that gives those wonderful markings on steaks the name on the bottom is Levco – I’ve owned these pans for at least 10 years, but the fact is I’ve barely ever used the round ones, and I only pulled out the grill pan for those once-in-a-while good steaks (which actually always stuck to my improperly cared-for pan). Consequently, the round ones -particularily the little one which had been hanging on a nail in the garage – were both rusted, and the square one sitting in the bottom drawer of my oven was sticky, and full of gunk beteen the grooves! I’ve only ever cleaned it with water, but rubbed with vegetable oil in the past, but now all three have been scrubbed, scraped, dried and LIGHTLY rubbed with bacon fat and are now warmed and seasoning – as I type this – in my oven! Gotta go bake something and not waste that oen heat, and then figure out what to make for supper in my freshly seasoned large round pan! PS – I solemly swear not to make steak in the square grill pan AGAIN until I have used it NUMEROUS times to cook bacon etc.
It took me quite a few years to get used to cast iron too, but now it’s all I use. I have very old ones that I found at thrift stores, and they have a nice smooth interior, as opposed to the new ones that are bumpy and rough. I also clean them in plain hot water, with the scrubby side of a blue scrubby sponge, drying them with the soft side of the same sponge, and directly putting them away. The rumors are true! Once you adjust to using cast iron, nothing sticks, and you will never have to buy another frying pan.
Karlie- Thanks for the recommendation about using olive oil! I’m glad to know it doesn’t get sticky (probably because it’s not an industrial oil!) so people who don’t want to use animal products can try this as well as coconut oil.
I have cast iron that has been passed down through the generations, as well as a few I purchased myself. When I first moved out of my parents home, I thought I would be more modern by using non-stick, but it became clear to me that I didn’t know how to care for it’s tender surface.
Caring for Cast Iron isn’t all that difficult if you’re using them on a daily basis like I do. Heck, I use just olive oil to top dress the pans before putting them away. They don’t develop the sticky stuff because they don’t sit around long enough to develop problems.
I guess saying “aluminum is better” is a bit of a reach, but I prefer a quality aluminum skillet for anything where temp control is important, since iron takes so long to respond.
Anonymous- Hmmm, I appreciate your take- I cooked with my grandmother’s nice aluminum pans for years and didn’t notice it was that superior. The health concerns eventually convinced me to part with it. You are right that it conducts heat well, and I believe that they use aluminum-wrapped bottoms on quality stainless steel pans (which I have and love for regular pots).
Good tip on removing old seasoning. I aim for that nice black finish of a seasoned pan. 🙂
The idea that cast iron heats evenly is actually false. For stovetop use, aluminum is better.
Also, it’s okay to use soap.
You can remove old seasoning by sticking your skillet right on top of a hot bed of coals on a campfire or in your fireplace overnight. When it cools, it’ll be a flat gray color. New seasoning will eventually turn it black.
Check this great link: http://www.cookingissues.com/2010/02/16/heavy-metal-the-science-of-cast-iron-cooking/
Calliope- Try coconut oil- I’ve heard others have good results with that as well!
Here from Feels Like Home-
This post made me grin. My Grandmother would have LOVED you. I’ll never forget the day she found out a neighbor was using dish soap to clean her iron skillets- for YEARS she talked about how she wanted to go save the pans from the neighbors. ha!
I have my Grandmother’s skillets now and I really only use them to make cornbread. I don’t eat bacon so I don’t know what the substitute to use is!
This is fabulous! We inherited a cast iron skillet from my husband’s father. My husband uses it more than I do. I am so glad to have this to refer to when cleaning…those eggs from yesterday sure did stick! LOL
Gotta agree with some of the comments…cornbread in the skillet is to die for!
Lauren- Kindred spirit! Keep trying- and thanks for the Stumble!!
Amy- Great tip- the power of water to loosen things should never be underestimated. 🙂
Rose- Wow, 4 pans? What a great stash! My handles aren’t sticky, but I also don’t spend time seasoning them. My first guess would be that it’s old residue and to try and scrub the handles (doesn’t matter how hard, ’cause the seasoning isn’t important there) to get it off, then just lightly grease them in order to keep rust at bay. After that, I leave them be unless I notice rust.
As for any kind of gunk, you probably need to go at those areas pretty firmly with a scrubber- even a bit of soap there- with the idea that you’re going to have to completely reseason them in the oven when the gunk is removed. Once they are completely clean, do the oven reseason, and then start using- first with greasy foods and working your way up to foods like eggs once you’ve got a good coating going on.
GREAT post!! I am all about the cast iron cookware 🙂
Blessings!
Gail
Bass Pro Shops has great deals on “pre-seasoned” (But you probably want to bacon grease it as well) cast iron cookware in all shapes and sizes. So much less expensive than something like Williams-Sonoma, and they have tons of it!
Definitely check them out.
I love mine. But I only use it camping. Last year I found liners for my dutch oven. Makes camp lasagna cleanup a breeze!
Here’s a tip for cleaning your pan. When your food is done cooking transfer it quickly to a plate, and run your super hot pan under water. This will de-glaze the pan and you won’t have to scrub at all usually. Unless you’re cooking something like eggs and cheese. Anything else will just melt away.
Just make sure it is HOT water so you don’t warp the pan. I have even done this after serving dinner. I put the rest of the food in a jar and fridge it. The I turn on the hot tap water, grab my kitchen nylon scrub brush and scrub my pan. When it rinses clear, I put it on the burner and turn it on for a minute until water is evaporating. Then turn off the heat and grab either my refrigerated bacon grease (that I filtered through a paper towel or coffee filter) or coconut oil and give the pan a very thin wipe, just enough to make it a little shiny, but not glossy.
I do this with ALL of my cast iron, including Dutch ovens, flat pan, pancake griddles and all 6 of my skillets.