How to Clean A Cast Iron Skillet And Care for It (Or How I Learned To Love Cast Iron)

Have you ever wondered how to clean a cast iron skillet? Or maybe you’ve been curious about how this versatile kitchen tool can replace your nonstick pans. In this guide on cast iron care and cleaning I share my journey and #1 tip from stuck-on food to throwing away my non-stick pans – and how to keep cast iron well-seasoned, too. If you’ve had a love-hate relationship with your cast iron, join me in saying goodbye to rust and stickiness and hello to delicious, evenly cooked dishes!

✩ What readers are saying…

holding clean cast iron pan in front of white cabinets

I cannot tell you how excited I am to write about my success with using a cast iron skillet because for many years I was not successful. How many? Twenty years – and I wish I were joking.

I acquired a cast iron pan shortly after I was married- I think it came from Brian’s grandma, or maybe a thrift store, but it had definitely been used. I didn’t grow up using cast iron, but I had heard people tell me all the reasons they loved their pans: they were naturally non-stick, last more than a lifetime, heat evenly, and so on. So I was was looking forward to trying it in my new household.

And try I did. But everything stuck- eggs, meat, you name it. Then I’d shove it to the back of the cupboard, eventually bring it out to try again with the same results, until it got permanently relegated to our little vintage trailer. Perfect for vintage cast iron, right? Plus, that meant there were only a few days each summer that I had to use it- and invariably curse it.

(I know now that when we scrubbed the dickens out of it to get all the stuck things off we were just perpetrating the cycle – hindsight is 20/20, right?)

However, after a number of years of marriage when my third set of non-stick skillets started peeling, I realized I didn’t want to keep buying new pans every few years so I needed to figure this cast iron pan thing out.

How to Clean a Rusty Cast Iron Skillet

By this time my sad, neglected skillet was rusty, but thanks to the internet (not around during my first attempts), I found out how to clean the rust and re-season the pan fairly easily. I basically followed steps similar to this technique:

  1. Gently scrub off any rust with a steel wool pad (plain, not the kind with cleaners in it).
  2. Wash and thoroughly dry the skillet – I set it on the stove for a few minutes on medium heat.
  3. Coat the inside and outside of the pan with your choice of oil/grease (see below!).
  4. Place the pan upside down in a 350 degree oven for one hour and then let cool in the oven.
  5. Repeat as needed (I did two rounds of oiling and heating on my rusty pan).

My #1 Tip To Finally Loving Cast Iron

There was one major thing I did differently, though, when it came to coating the pan from what I read online and had done in my previous attempts. I did a lot of research and what I read over and over again was to use this to season the pan:

How to clean and care for cast iron number 1 tip

Not canola or a vegetable oil as I had always used, but bacon grease!

You can also use lard or coconut oil (but NOT olive oil as some sites state, since olive oil has a low smoke point and shouldn’t be used in applications like this). I prefer bacon grease for a simple reason – it’s free after cooking bacon, unlike coconut oil, and lard isn’t easy to come by.

(Oh, and side note that has to be mentioned: the fact that I am using something we regularly used to throw away? You know I love that!)

Why is what you coat cast iron with so important?

The short answer? Industrial oils.

You know that sticky coating that you can feel on old pans, cookie sheets, muffins pans, and other baking pans? This comes from using the industrial vegetable oils (corn, vegetable, canola) that have only been consumed regularly since the 1950’s (and we know cast iron has been around a lot longer than that).

They are called industrial oils because they cannot be made without a factory and machines – think about how you would get oil out of corn in your kitchen. It can’t be done, unlike rendering lard, collecting bacon grease, or even cooking coconut meat to extract the oil.

Thinking about how unnatural these oils are led our family to give up all industrial oils as a part of eating real, healthy foods.

The other thing I discovered was that awful “old oil” smell I had notice was also a direct result of using industrial oils. I have found that I don’t get that smell at all when I use a bit of bacon grease to season our pans.

clean cast iron skillet on green towel

But won’t food cooked in the pan have a bacon flavor? Does it smell like bacon when heating the pan?

I wondered this too! While it did smell like bacon a bit during the re-seasoning process, I’ve learned it doesn’t smell much like bacon in normal usage and has never made our food taste like bacon.

I think it’s because you use very little grease on the pan to maintain the seasoning – less than 1/8 of a teaspoon. It may also be because it’s best to use only the clear part of the grease (which is, in fact, like rendered lard). Whatever the reason, there’s no noticeable smell or flavor.

The ultimate test for me? Scrambled Eggs.

For the first few months after re-seasoning, I cooked only things that were greasy like bacon, or things that don’t stick like sautéed mushrooms in order to build up more of the seasoning to be more “non stick.”

The ultimate test in my book was scrambled eggs – it’s where I had the most trouble before. Finally the weekend came to make scrambled eggs with cheese.

And all I can say is I’m glad there wasn’t a video camera around as I was jumping up and down in front of the stove saying “they’re not sticking!” over and over again. As if I was the first one to discover this, ha!

There were still bits of egg and cheese stuck to the pan in places (see an example below), but it wasn’t much and there wasn’t that full layer of stuck on egg I used to get. (Update: after years of proper use and seasoning, I don’t even have this much egg/cheese stick to the pan anymore – it really is almost non-stick!)

Of course I couldn’t keep this to myself. If you’re like me and have had trouble with cast iron – or think it’s too much work – I want to show you how simple it can be to clean and care for cast iron – and encourage you that it really can become your favorite pans with just a bit of your time and attention!

How to Clean A Cast Iron Skillet: Step-by-Step

dirty cast iron skillet from scrambled eggs

Step 1: Remove any cooked on residue. TIP: After serving food, run a bit of water in the pan to sit on the stove until you’re ready to clean it.

using plastic scrubber to remove bits from skillet

Use a plastic scrubber, walnut scrubber, or other non-metallic option (metal can remove the seasoning).

TIP: Some people regularly use coarse salt, but that would be wasting something in my frugal world, ha! However, if you have really stuck-on food, it is a good option- I’ve used it successfully for the residue left after browning meat.

using a scrub sponge and water to wash skillet

Step 2: Wash the pan with hot water only and no soap. Yes, it’s OK, it is getting clean, I promise (though you can occasionally use a bit of soap if you need). I do use the scrubber side of my sponge (though now I only use a walnut scrubber sponge) and haven’t found that it takes the seasoning off, like some sites warn against. Your call.

drying cast iron skillet on stove

Step 3: Dry the pan thoroughly on the stove. Heat it for just a minute or so on medium-high heat – not high and don’t walk away! (Yes, this has happened to my daughter and the pan got almost red with heat, but luckily didn’t ruin it – whew.)

rubbing cast iron pan with bacon grease

Step 4: Season. Remove the pan from the burner and turn it off. Using a cotton rag (or paper towel, though they can leave paper residue) grab a smear of bacon grease and rub it all over the inside of the warm pan. Occasionally add it to the outside of the pan, whenever it seems to be looking ‘dry’ and like it needs it.

dry and seasoned cast iron skillet

Step 5: Let cool. Set the seasoned pan back on the still warm burner and let the pan cool there before putting away. This helps seal in the seasoning.

That’s it! Yes, it takes a few minutes more than a regular skillet to dry, add the grease, and then let cool, but it’s small potatoes in the big scheme of things, right? Especially it means you won’t have to be replacing skillets in the future!

Here’s a common question I’ve been asked often since first publishing this:
“I just starting using a cast iron skillet and every time I clean it and re-season it with oil, the paper towel is gray and ashy looking. I can’t get it to come clean. Is that normal?”

That is normal – it’s not dirty, that’s the iron (and what causes the food cooked in it to be a good source of iron in our diet!) and also some of the seasoning – you don’t want to rub it all off as that’s what gives the ‘non-stick’ surface.

clean cast iron pan on green towel

Tips to Maintain Cast Iron

  • Do these same cleaning steps every time you use your skillet and you will keep a nice gleam on the pan that tells you it’s seasoned enough to meet all your non-stick needs.
  • It’s also a good idea to regularly cook things in it with more fat, like bacon, browning ground beef, or cooking vegetable fritters or zucchini feta fritters in avocado oil.
  • If it seems like the seasoning is wearing off, simply go through the steps to re-season the pan again.
  • Remember that acid foods like tomatoes and lemons can remove some of the seasoning, so long cooking of these things (like sauces) should be reserved for a stainless steel pan.

While the steps to clean and care for cast iron may have a few more than non-stick coated pans, it’s well worth it and becomes second nature after awhile. And then you may be like me in saying goodbye to non-stick pans forever!

Reader Raves

Have you ever had issues with cast iron (tell me I’m not alone!)? Do you use it or want to use it? Leave a comment and let me know!

Want to save this?

Enter your email below and you’ll get it straight to your inbox. Plus you’ll get easy new recipes, gardening tips & more every week!

Save Recipe

Print Pin
5 from 18 votes

How to Clean and Maintain Cast Iron

Steps to to clean a cast iron skillet, with simple tips that will create a non-stick surface so you can throw away all your unhealthy non-stick pans.
Work Time5 minutes
Total Time5 minutes
Author: Jami Boys

Materials

  • Any type of cast iron skillet, pot, or pan
  • 1 rubber scraper or any other non-metallic scraper
  • sponge or dish cloth
  • 1/8 teaspoon bacon grease or lard, or coconut oil
  • small cotton rag or paper towel

Instructions

  • Step 1: Remove any cooked on residue. Use a plastic scrubber, walnut scrubber, or other non-metallic option (metal can remove the seasoning). TIP: After serving food, run a bit of water in the pan to sit on the stove until you're ready to clean it.
  • TIP: Use coarse salt, rubbed all over with a sponge or dish cloth if you have really stuck-on food, like after browning meat.
  • Step 2: Wash the pan with hot water only and no soap, preferably. You can use a bit of soap every now and then, but detergent is harsh and may remove the seasoning.
  • Step 3: Dry the pan thoroughly on the stove. Heat it for just a minute or so on medium-high heat – not high and don't walk away! TIP: set a timer.
  • Step 4: Season: Remove the pan from the burner and turn it off. Using a rag (or paper towel) grab a smear of bacon grease and rub it all over the inside of the warm pan. Occasionally add it to the outside of the pan, whenever it seems to be looking 'dry' and like it needs it.
  • Step 5: Let cool: Set the seasoned pan back on the still warm burner and let the pan cool there before putting away.

To Maintain Cast Iron

  • Do these same cleaning steps every time you use your skillet and you will keep a nice gleam on the pan that tells you it's seasoned enough to meet all your non-stick needs.
  • Regularly cook things in it with more fat and avoid long simmering acid foods like tomatoes and lemons.
  • If it seems like the seasoning is wearing off, simply go through the steps to re-season the pan again.

To Re-Season (and remove rust, if needed):

  • Gently scrub off any rust with a steel wool pad (plain, not the kind with cleaners in it).
  • Wash and thoroughly dry the skillet – I set it on the stove for a few minutes on medium heat.
  • Coat the inside and outside of the pan with bacon grease, coconut oil, or lard.
  • Place the pan upside down in a 350 degree oven for one hour and then let cool in the oven.
  • Repeat as needed.
Did you make this?Mention @anoregoncottage or tag #anoregoncottage!

More Reader Tips

Note: This article was originally published in March of 2011 and became one of my first viral posts. For me, it was simply a matter of sharing my excitement over finally figuring out how to use my cast iron pans so I could throw out the non-stick pans for good. I just had to overlook the fact that thousands of people were seeing my dirty egg pan, lol!

Here are just a few other tips readers have shared in the 100+ comments:

  1. To renew an old, rusted cast iron pan:
    Option 1. “Just spray the piece all over, inside, outside and handle with oven cleaner. I usually do this outside. Close it up in a trash bag, place it outside in the sun, let it sit for 24 hrs. Rinse with the hose. Repeat if necessary. Bring it inside, wash with hot water, rinse with straight white vinegar, (to neutralize the oven cleaner) rinse with hot water, season. Voila. Like new. Every single time.”
    Option 2. “You can also just leave it in a self cleaning oven. That will turn everything to ash! Then, re-season.”
  2. Using only oil to clean:
    “Once pan is seasoned, you do not have to use water to clean it in many instances. I use olive oil for my cooking, don’t let it burn. After cooking scrambled eggs, put a bit of olive oil (Jami here: please don’t use olive oil – it has a low smoke point!) in pan to wet the surfaces, use little spatula or paper towel – I use spatula to rub paper towel around not my fingers. After that, if anything still sticks, I may put a bit of hot water, but never leave it soaking with water.”
  3. Not using oil each time:
    “I don’t find that I need to oil my pan every time though, maybe because I use plenty of butter to cook my eggs, and it’s so well seasoned the surface shines. I have a small ancient cast iron pan and nothing sticks to it.”
  4. Tip for more non-stick:
    “…one thing you should ALL be doing is PREHEAT THOSE PANS!!!! This gets the old seasoning in shape for new oil to be added and fill in all those micro grooves that are what makes food stick! There are few things–other than maybe warming a tortilla or such–that don’t need SOME oil to cook (even in a non-stick!!!) and cast iron has more little grooves and spots than other material by it’s nature. Don’t put it on HIGH and wander off; just use a low or medium flame to get to temp and THEN add your oil.”

More Easy Cooking Tips

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating




5 from 18 votes

157 Comments

  1. When you are using the charcoal grill outside and are finished cooking the food you can put a greased cast iron pan in the grill close it up and let the coals burn out naturally ( no smoked out house ) when done take an oily rag and wipe again . I used Olive oil seasoning a skillet and griddle (both 12 in round Lodge Cast Iron) and to oil it after washing and never had eggs or anything else stick … yea i made cornbread in the skillet and it didn’t stick either if i greased the skillet in butter before putting in the batter

  2. Love cast iron I have a Dutch oven that I got for Christmas, a 15in and a 10in skillet and a set of waffle irons. All except the waffle iron were easy to season and to keep seasoned. Once I get it seasoned correctly I’m sure it will make wonderful waffles. I grew up cooking and cleaning cast iron so I knew how to handle it since I was young. My mom had a flat round skillet that she used to make biscuits on I wish I had inherited her pans but I had to aquire my own my older sister has an large collection of cast iron pieces most she found in a house she moved into. Lucky girl.

    1. Wow, waffle irons? I’ve never heard of that! I’ve been eying cast iron loaf pans for bread, though. And, yes, your sister totally lucked out. 🙂

    1. The link to Wiki explains- they use a 275 degree oven for 2 hours after coating it with bacon grease. I think my oven was at 300 degrees, actually- but not sure what difference that would make, if any. 🙂

      -Jami

  3. I’m still using the one I got as a wedding gift in the 60s. It was one of my mother’s that she passed down to me. Cooks the absolute best corn bread in the world. Plus, as someone else noted, makes a great pineapple upside down cake. Easy cleanup..

  4. I love my cast iron skillet- I need to dig out my dutch oven and start using it too. I also have a comal (which is a round flat skillet) and I using it for making tortillas, which I read is what its for and its so awesome, but also for cheese quesadillas and the like….
    Anyway, the key to making eggs not stick at all… like not even the tiny bit of gunk that you had left in the picture above is to make sure it is fully heated up all the way before putting the eggs in. It works every. single. time. And also works in stainless steel to a lesser extent.

  5. Chrissy- What a great tip- thanks, I’ll remember that! And that comal sounds wonderful- guess I need to add another pan to my “wish list.” 😉

  6. Thank you, Karajeanne! I was so in your spot not long ago, and I’m totally in love with cast iron now- I’ve got a dutch oven, a bigger frying pan and am thinking about loaf pans now. Hope this helps you find a way to love yours, too!

  7. I’m really enjoying exploring your site,(following too as long as I don’t get distracted before I exit) I’m typing one handed so I’ll make it brief…can’t wait to finally use a cast iron skillet without cursing…perfect timing, found you just when I needed you.

  8. Thank you, Tammy, for more info about using it on a smooth cooktop!

    Verna- I wish I could find some at Thrift stores- there are none to be found in the last year I’ve been looking. Ha! I think everyone is loving them now. 🙂

    Good point, too about the oven cleaner!!

  9. I love my cast iron. I started with a chicken fryer and went crazy from there. Most are from yard sales and thrift stores, or family. Some are older than I am. My daughter say’s she wants my cast iron when I die. She’s going to have to wait a long time (I hope).

    P.S. To an anonymous post. Don’t use oven cleaner in your pans. You are putting toxic chimicals in it. Burn the gunk off it your BBQ or in a self cleaning oven. Then wash, dry and reseason.

  10. I have used mine on my ceramic stovetop. Just dont slide the pan around. I have no scratches or discoloration on my top, and I also tend to cook with a lower heat setting when using my glass pots or the cast iron. I really do need to start using my cast iron more tho.
    {url}http://stitchthisdesigns.blogspot.com/{/url}

  11. Vicky T- Hmm, good question. I don’t really know, however, since I’ve never owned a ceramic cooktop. I did find this ehow article saying you could use certain types:

    http://www.ehow.com/facts_7767988_can-cast-iron-ceramic-cooktop.html

    And also there was a comment from a person that I loved (since we’re all about imperfection here!):

    “I have a Dacor smoothtop and have successfully used cast iron and le Creuset for years. I have some scratches but so what? It’s a stove, not a museum piece.”

    If I were you, I’d use them and just be careful. Hope that helps!

  12. I am so thankful for your suggestions, but I have another question for you. Can cast iron be used on ceramic top stoves? I have seen a couple of posts saying it can and other that say not to. HELP! I have a couple cast iron pieces that I would love to use. Hubby uses the square 10″ pan on the gas grill for preparing bacon and eggs. Works great.

    1. I have used them on ceramic and have never had a problem. Just make sure that you don’t push them across, because if there is anything on the stove top you can scratch the surface. If the pan is bigger then the burner you may get a ring around the burner, just sprinkle baking soda and spray some vinegar on it and use a scrubbie to clean it off.

      1. Don’t use vinegar. It’s acidic by nature and will cause pits and or weaken cast iron. Baking soda and vinegar react and they both essentially lose their active properties and or will weaken them, it’s good to create a safe gaseous mixture for clogged drains. Although, baking soda will always remain a good scrubber 🙂 Vinegar can also leave a taste around which you may not want.

        Baking soda and water are the best however, my co-worker who was a professional chef and head chef for a decade just uses a scrubber and hot water for home use.

        You won’t need to season it either since the oils left over will take care of it.

        Remember cast iron is porous, you don’t want it absorbing “icky”, also being Muslim I don’t have bacon grease lying around to slather on but the above mentions by Jami are awesome especially for vegetarians which my wife flip flops between. However fatty fat fat beef gets the job done 🙂

  13. Anonymous- Thanks for the suggestion- I searched how to add a Print Friendly button and turns out it was really easy! Hope you enjoy. 🙂

  14. i have them on my kithen wall my grandma old ones if i find them in thrift store i buy them if there bad when you get them old caked on stuff spay oven cleaner on them put in plastic bag then set out in the sun most will come off then reseason them in bacon fat keep the bacon fat in the frig last forever corn bread turn ot good in them

  15. My parents’ cast iron pans are over 70 years old, but they’re still using them, so I had to break down and buy my own. I have a Lodge Logic, which I love. I also have a huge one a friend gave me recently, which she found at a yard sale.

    My favorite one, though, is my Aebleskiver pan from Aunt Else’s. It has never stuck.